Tech Sights Aperture Sight for Ruger Mini-14 and Mini-30 MINI200

This sight is designed for Ruger Mini 14/30 and Ranch Rifles manufactured AFTER 2005.  Please confirm the model and date of manufacture of your rifle before ordering.  

The MINI200 sight for the Ruger Mini 14 is an upgrade for compatible 5800 models of the Ruger Mini and Ranch Rifles manufactured after 2005. The MINI200 will features both windage and elevation adjustment, and is a significant upgrade from the folding leaf sight that is installed at the factory.

Tech Sights MINI200 Manual

Features

• All Steel Construction
• Easy Click Adjustments on Elevation
• Easy Click Adjustments on Windage
• Standard .062 Aperture
• Compatible with IRAS Aperture System, which allows installation of different aperture sizes
• Easy installation
• Adds adjustment ease to the 5800 series produced from 2005 to present

Compatibility

PLEASE READ BEFORE PURCHASING:

Ruger has significantly changed the design of the Ruger Mini 14, Mini 30, and Ranch rifle over the course of its lifetime.  Because of this, there are three different Tech Sights to choose from, and they are NOT interchangable.  

Why do different models require a different Tech-Sight?

The shape and/or mount spacing on the Mini rifles has been changed by Ruger over the course of its life.  Some models require a mounting adapter block, others require a completely different model sight.

Installation

1. Make sure the firearm is unloaded with magazine removed.  Lock the bolt in the open position.  Never install sights on a loaded firearm.
2. Remove the rear sight by removing the screw at the front of the sight assembly.
3. Attach the new rear sight in the existing mounting location, using the included mounting screw.
4. Apply a small amount of blue thread locker to the two 8-36 x 1/8" set screws.  Thread and tighten.
5. Enjoy shooting your upgraded rifle.