Tech Sights Aperture Sight for Ruger 10/22 Collector Series MINI200C

This sight is designed for Ruger 10/22 Collector Series Rifle.

The MINI200C sight for the Ruger 10/22 Collector Series is a receiver mounted rear sight that utilizes the existing OEM Ruger screw to attach directly to the receiver.  The MINI200C features both windage and elevation adjustment.

Features

• All Steel Construction
• Easy Click Adjustments on Elevation
• Easy Click Adjustments on Windage
• Standard .062 Aperture
• Compatible with IRAS Aperture System, which allows installation of different aperture sizes
• Easy installation

Installation

1. Make sure the firearm is unloaded with magazine removed.  Lock the bolt in the open position.  Never install sights on a loaded firearm.
2. Remove the rear sight by removing the screw at the front of the sight assembly.
3. Attach the new rear sight in the existing mounting location, using the included mounting screw.
4. Apply a small amount of blue thread locker to the two 8-36 x 1/8" set screws.  Thread and tighten.
5. Enjoy shooting your upgraded rifle.