Armasight CO-Mini ID Day/Night Vision Riflesight NSCCOMINI126D-1

Armasight CO-Mini ID Day/Night Vision Riflesight NSCCOMINI126D-1 Review

Designed for short-to-medium ranges, the Armasight CO-MINI is the most compact commercially available Clip-On Night Vision Device. The CO-MINI uses image intensification technology and is designed to convert most low-to-mid power daytime sights, scopes, or binoculars to operate at night. The CO-MINI can be mounted in seconds and without tools. It can be attached in front of a day rifle scope (using its quick release Picatinny mount) or directly onto the day scope (or binocular/ telescope) objective lens with the included adaptor.

Suitable for use with most commercial and military specification day time sights, telescopes or binoculars (up to 6X magnification). Because the CO-mini is mounted in front of your own day scope, the shooters eye relief is not altered, and shot release and follow through all remain intuitive. The clip-on device is factory bore-sighted to better than 1MOA accuracy, so no alteration in zero is experienced, and it really is as simple as mount and shoot, just as in day time.

The Armasight CO-MINI is intended primarily for use by the most demanding hunter or short range assaulter, where field of view and ease of use is more important than high magnification.

Whether your day scope is a well known brand or not, the Armasight CO-MINI will work just as well at magnifications 2-6X. Available in a variety of high performing Gen 2+ and Gen 3 image tube options to cater for all budgets, the CO-MINI brings high quality clip-on night vision within everyone’s reach.

SPECIFICATION

• IIT Generation Gen 2+ ID
• Resolution 45-64 lp/mm
• Magnification 1x (recommended to use with up to 10x day time optics)
• Battery Life 60h ( 3 V ) / 30h (1. 5 V )
• Lens System F1:1.44, 38mm
• FOV 12°
• Range of Focus 10 to infinity
• Diopter Adjustment No
• Controls Direct
• Automatic Brightness Control Yes
• Bright Light Cut-off Yes
• Infrared Illuminator Detachable Long Range IR Illuminator
• Power Supply 1 x 1.5V AA type battery or 1 x 3V CR123A type battery
• Environmental Rating Waterproof
• Operating Temperature -51°C to +49 °C
• Storage Temperature -51°C to +49 °C
• Dimensions 124 x 69 x 56 / 4.9 x 2.7 x 2.2 (LxWxH; mm/in)
• Weight 0.48 / 1.06
• Warranty 2 years